Canon 4400F - CanoScan - Flatbed Scanner Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemindai Canon 4400F - CanoScan - Flatbed Scanner. Canon 4400F - CanoScan - Flatbed Scanner 12 halaman. Canon canoscan 4400f: quick start
Juga untuk Canon 4400F - CanoScan - Flatbed Scanner: Panduan Memulai Cepat (21 halaman)
Halaman Cetak
Preparing the Scanner
Unlocking the Scanner
1
Peel the seals off the scanner.
2
Slide the lock switch on the bottom of the scanner toward the unlock mark (
• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.
• Handle the scanner with both hands. Be careful not to drop the scanner.
• Always lock the scanner when carrying or transporting it.
• When locking the scanner, do not lift up the back and tilt the front (scanner button
location) downward. You may be unable to set the lock.
Connecting the Scanner
1
Connect the scanner to your computer with the supplied USB cable.
2
Connect the supplied AC adapter to the scanner, and then plug in.
• Only use the USB cable and the AC adapter provided with the scanner. Use of other
cables or adapters may lead to a malfunction.
• When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB
Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The
scanner operates in this condition without problems.
• The scanner does not have a power switch. The power is activated as soon as the AC
adapter is plugged in.
Unlock Mark
Preparing the Scanner
).
3