Canon CanoScan 5000 Panduan Memulai Cepat - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemindai Canon CanoScan 5000. Canon CanoScan 5000 19 halaman. Usb flatbed scanner

Scanning Film (for CanoScan 5000F)

Place the loaded film guide on the scanner platen.

Up to three frames in a film strip can be scanned at once. Position the film guide so that the three frames

being scanned are toward the back of the platen and, as in the diagram, align the film guide with the

FILM symbol on the platen. To scan the remaining frames, pivot the film guide 180°.

Up to two slides can be scanned at once. Position the slides toward the back of the platen and, as in the

diagram, align the film guide with the SLIDE symbol on the platen's left-hand side.

Calibration Slot

Platen

• Do not block the calibration slot or the small position detection hole on the film

guide when you are scanning film. Obstructing either of these openings will prevent

the film from being scanned properly.

Close the document cover.

• You can purchase the Accessory Kit for CanoScan 5000F (AK-5000F) if the protective

sheet or film guides are lost or damaged.

Scanning Film

The following steps explain how to scan the film with ArcSoft PhotoStudio.

Windows

Select [Start], [Programs] or [All

Programs], [ArcSoft PhotoStudio] and

[PhotoStudio 5].

Click the Acquire icon

[File] menu and select [Acquire].

ScanGear CS will start.

If an error message appears, click the [File]

menu, choose [Select Source], select your

scanner model name and click the [Select]

button.

Film Strip

To Scan Frames 1-3

Pivot the Guide 180

or click the

Position Detection Hole

To Scan Frames 4-6

Macintosh

Double-click the [Applications (Mac OS

9)] and [PhotoStudio] folders and the

[PhotoStudio] icon.

Click the Acquire icon

[File] menu and select [Import...].

ScanGear CS will start.

When the [Select Source] dialog displays, select

[ScanGear CS 8.0] and click the [OK] button.

Slides

or click the