Doran DS8030 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan Doran DS8030. Doran DS8030 19 halaman. Wheelchair scale

Section 4. Data Communications

The indicator is equipped with an RS-232 communications port. The RS-232

connection is located on the back of the indicator behind the top access cover.

An optional RS-232 cable is available. Insert the phone style connector into the

receptacle on the indicator housing and connect the 9-pin connector to your

computer or printer.

Note: This option may reduce battery life.

Basic understanding of RS-232 data communications is needed when setting up

the indicator to communicate with a printer or PC. When setting up an RS-232

communications system, there are two concerns which affect the configuration of

that system. These are:

• Baud Rate

• Data Bits and Parity

The baud rate determines how fast the data is sent from the scale. The sending

and receiving units must be set to the same baud settings. Refer to the For.

parameter for details.

The indicator's data bits, parity and stop bits are set when configuring the For.

parameter. The receiving units must match the scale setting for proper

communication.

The indicator is equipped with a USB communications port. The USB connection

is located on the back of the indicator behind the top access cover. An optional

USB cable is available. Follow the instructions included with the option to install

all necessary drivers.

Once the USB drivers are installed on your PC, insert the USB connector into the

receptacle on the indicator and connect the other end of the cable to your

computer.