AIR GAP TAP-A-FLOW AG250-303 Prosedur Instalasi

Jelajahi secara online atau unduh pdf Prosedur Instalasi untuk Perabotan Dalam Ruangan AIR GAP TAP-A-FLOW AG250-303. AIR GAP TAP-A-FLOW AG250-303 2 halaman. Floor pedal, stainless steel finish

Halaman Cetak

Secure pedal to the floor by removing paperback and applying

adhesive pads to the bottom of pedal (8) or secure pedal using

mounting screws (9). (FIG.4 )

FIG. 4

Press on pedal, open the faucet, and adjust it to the desired water

temperature and flow rate.

As long as the pedal is pressed, water will flow from the faucet.

When the pedal is released, the water flow stops.

CAUTION:

During installation, avoid bending valve actuating. Any bending needs to be

smooth.

500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: [email protected]

AG250-303

Model:

TAP-A-FLOW™

FLOOR PEDAL,

STAINLESS STEEL FINISH

Part No.

AG250-303

Doc. # 400-0793-001

Placentia, California