ASTRO DEVICES Nexus DSC Pro Panduan Pengaturan Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Aksesori ASTRO DEVICES Nexus DSC Pro. ASTRO DEVICES Nexus DSC Pro 13 halaman.

It shows that the telescope needs to be moved

down by 27.2 degrees and counter clockwise

by 47.7 degrees. As you start moving the

telescope the numbers will start updating.

Continue to move until both numbers are close

to 0s:

If you look through the eyepiece then you will

see NGC55 there now.

To display additional information about the

object just press

Pressing

back to the previous screen.

Please refer to the Nexus DSC Pro User

Manual for advanced topic on objects'

selection.

Using Nexus DSC Pro with

SkySafari

If your Nexus DSC Pro has the optional WiFi

card then you can connect it to SkySafari

Plus/Pro running on iOS, Android or Mac OS

X. The following steps describe how to set

everything up on iPhone but the procedure is

very similar for Mac OS X and Android.

Nexus DSC Pro setup

Please go to the top menu on Nexus DSC Pro

and select Settings and then WiFi:

Make sure that WiFi Mode is set to Access

Point:

Nexus DSC Pro Quick Setup Guide

key:

will take you

ESC

Press

until the third page of setting

appears and make sure that Protocol is set to

LX200:

SkySafari Setup

Next please go to Settings->WiFi on your

iPhone: and join Nexus DSC Pro's network:

The next steps is to set SkySafari's settings.

Please start SkySafari on your iPhone and go

to Settings->Telescope->Setup: