Akw 04150 Instalasi dan Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Kursi roda Akw 04150. Akw 04150 8 halaman.

Cushion/Pad assembly

Fit hole reducers x8 to aLL holes if

cushions are not used.

Remove them if cushion is used.

note: the position of the front and

top pads are indicated. The seat pad

retainer caps are fitted from underneath

the seat. each pad has locating bungs

that use a retainer cap (4 in total).

To fit the retainer cap, it should be

rotated in a clockwise direction whilst

applying firm pressure towards the seat

pad until secure.

The seat pad may need to be held in

position whilst the retainer caps are

fitted. The retainer cap should be hand

tightened so that it is a secure fit.

Be careful not to overtighten the retainer

caps.

Lift arms to locate and adjust the screw:

unscrew to lift the arm and screw to

lower it.

Fit Hole Reducers to

ALL HOLES

if cushions are not

used. (Fig.1)

Retainer cap

General: 01905 823 298