Canon imageCLASS MF6560 Panduan Pemula - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemula untuk Pemindai Canon imageCLASS MF6560. Canon imageCLASS MF6560 17 halaman. Canon fax machine starter guide

Halaman Cetak

1. Set up the Machine

Load Paper

Pull out the paper cassette until it stops.

Set Up the Paper Cassette to Fit the Paper Size

Incline the rear paper end guide until it is unlocked,

then remove it from the paper cassette.

Even the edges of the paper stack.

Attach the guide to the slots of the desired paper

size.

Load the paper stack print side up.

NOTE

Make sure the back edge of the paper stack touches the

rear paper end guide (C), the paper stack should not

exceed the load limit mark (A), and the load is under the

hooks (B) on the paper guides.

Connect Telephone Cables (MF6550/MF6560/MF6580 Only)

Connect the supplied telephone cable to the line jack (A) and the wall jack.

Connect your external telephone to the external device jack (B) if required.

Gently insert the paper cassette as far as it will go.

CAUTION

Be careful not to get your fingers caught.

NOTE

For loading paper in the multi-purpose tray, see

Chapter 3, "Print Media," in the Basic Guide.