Canon imageFORMULA CR-190i Panduan Pengoperasian & Pemeliharaan - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Pemeliharaan untuk Pemindai Canon imageFORMULA CR-190i. Canon imageFORMULA CR-190i 31 halaman. Cheque scanner
Juga untuk Canon imageFORMULA CR-190i: Panduan Instalasi (19 halaman), Panduan Pengoperasian & Pemeliharaan (31 halaman), Brosur & Spesifikasi (26 halaman), Brosur & Spesifikasi (2 halaman), Brosur & Spesifikasi (4 halaman)

Document Feeding and Scanning

This section describes how to load and scan documents.

CAUTION

• Avoid wearing loose fitting clothing, dangling jewelry, long ties,

or long hair that could become entangled with moving parts,

especially the rollers that feed paper through the scanner. If

such objects become entangled, immediately disconnect the

power plug from the power outlet.

• Check the paper stack and remove all clips, staples, pins, or

any other type of metal or plastic fastener. These objects may

cause damage to the document, a paper jam, or a scanner

malfunction.

• Do not touch anything except the operation buttons when the

jogger is operating or documents are being fed.

• Do not touch documents that are being fed under any

circumstances. The documents that are being fed may cut your

hand.

Carefully align the edges of the document.

Place the first page of the document facing you, and place

the leading edge of the document into the scanner.

If the documents are not aligned, press the JOG Button.

The jogger mechanism can be used to align documents.

IMPORTANT

• If you press the JOG Button when a batch of documents of various

sizes are loaded, the alignment will be incomplete, and the

documents will not be scanned in the order loaded. If you are

scanning documents of various sizes, align the leading edges of all

the documents with the entry point of feeding.

• The jogger mechanism is not available for documents of less than

5.9" (150 mm) in length.

NOTE

• The jogger does not work when the shutter is open. It occurs on the

following conditions:

• The STOP Button is pressed and the scanning stops.

• There are documents on the document tray when a paper jam

occurs.

Remove the documents from the document tray to close the shutter.

If the jammed document remains or the Top Cover is removed, the

jogger does not work.

• The jogger vibrates for 6 seconds, and then stops. Press the JOG

Button to stop the jogger.

Adjust the Eject Stopper in accordance with the

document.