Flying Industry Development 0020794 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kontrol Jarak Jauh Flying Industry Development 0020794. Flying Industry Development 0020794 2 halaman. 1ch wifi rf remote controls switch kit with 30a ac power output for home automation

Halaman Cetak
Maximum Working Current: 30A
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm
Transmitter Parameters:
Model No.: C-2
With Sliding Cover: Slide up when it doesn't work (to protect the button). Slide down the button will appear.
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Transmitting Distance: 100m / 300ft (theoretically)
If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm
Operation:
1) Controlling the device by RF transmitter (C-2):
When the receiver is set to self-locking mode: Press -> On; Press again -> Off.
Press button A on the transmitter: Output terminals outputs AC power, and controlled device is turned on
Press button A again: Output terminals stops outputting, and controlled device is turned off
When the receiver is set to interlocking mode: Press -> On; Press other button -> Off.
Press button A on the transmitter: Output terminals outputs AC power, and controlled device is turned on
Press button B on the transmitter: Output terminals stops outputting, and controlled device is turned off
2) Controlling the device by smart phone:
When the receiver is set to self-locking mode: Press -> On; Press again -> Off.
Press button A on the smart phone APP: Output terminals outputs AC power, and controlled device is turned on
Press button A again: Output terminals stops outputting, and controlled device is turned off
When the receiver is set to interlocking mode: Press -> On; Press other button -> Off.
Press button A on the smart phone APP: Output terminals outputs AC power, and controlled device is turned on
Press button B on the smart phone APP: Output terminals stops outputting, and controlled device is turned off
Delay Function:
The delay time can be accurate to the minutes, the shortest delay time is 1 minute, and the longest delay time is 24 hours. Up to 8 delay times can be
set. The device will automatically turn on or off when the set time reached.
Timing Function:
Users can set the device to run automatically at different times during the day. You can set up to 4 groups of timing, each set of timing includes a time
to turn on the device and a time to turn off the device.
Cycle Timing Function:
User can set a run time and a cycle time to set the device to run repeatedly and automatically. For example, set the device to start once every hour,
each time runs for 20 minutes, and the cycle is repeated automatically.
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com