Astro Pneumatic Tool 30570 Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Sander Astro Pneumatic Tool 30570. Astro Pneumatic Tool 30570 9 halaman. 20v 7" brushless variable speed rotary polisher w/ 2 batteries
Halaman Cetak30570
Model:
Warning: If any parts are missing, do not
operate tool until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
The charging time may vary according to the
surrounding temperature and the power source
voltage.
DISPOSAL OF THE EXHAUSTED BATTERY
For safety and to preserve natural resources,
please recycle or dispose of properly.
This product contains Lithium-ion batteries.
Must be disposed of properly.
Local, state, or federal laws may prohibit disposal
of Lithium-ion batteries in ordinary trash. Consult
your local waste authority for information regarding
available recycling and/or disposal options.
PREPARATION FOR RECYCLING OF
BATTERY PACK
Warning: Do not attempt to destroy or
disassemble the battery pack or remove any of
its components. Do not touch terminals with
metal objects as short-circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
TIPS FOR MAINTAINING MAXIMUM
BATTERY LIFE
a) Charge the battery pack before completely
discharged. Always stop tool operation and
charge the battery pack when you notice a
decrease in tool power.
b) Never over discharge a fully charged battery
pack. Over discharging shortens the battery
service life.
c) Charge the battery pack under room temperature
between 32-113°F (0-45°C). Let a hot battery
pack cool down before charging it.
d) Charge the battery pack once every 3 months if
you do not use it for a long period of time. Li-ion
batteries are known to discharge over time.
Battery may be damaged if it is over discharged.
Product Type:
20V 7" BRUSHLESS VARIABLE SPEED
ROTARY POLISHER W/ 2 BATTERIES
INSTALLING OR REMOVING BATTERY PACK
a) Hold the tool and the battery pack firmly when
installing or removing battery pack. Failure to
hold the tool and the battery pack firmly may
cause them to slip off your hands and result in
damage to the tools and battery pack and a
personal injury.
b) Always switch off the tool before installing or
removal of the battery pack.
c) To remove battery pack, press the release
button, and pull out.
d) To install the battery pack with the charger,
align the terminal pin on the charger and slide
the battery into the charger.
Warning: Do not use force when installing
the battery pack. If the battery pack does not
slide in easily, it is not being inserted correctly.
Verify that the switch is in OFF position before
inserting or removing the battery pack.
SAFETY WARNINGS COMMON FOR
POLISHER OPERATINS
a) This power tool is intended to function as
a polisher. Read all safety warnings,
instructions and specifications provided
with this tool. Failure to follow all instructions
listed below may result in injury.
b) Operations such as grinding, sanding, wire
brushing or cutting-off are not
recommended to be performed with this
power tool. Operations for which the power tool
was not designed may create a hazard and
causer personal injury.
c) Do not use accessories which are not
specifically designed and recommended by
the tool manufacturer. Just because the
accessory can be attached to your power tool,
it does not assure safe operation.
d) The rated speed of the accessory must be at
least equal to the maximum speed marked
on the power tool. Accessories running faster
than their rated speed can break and fly apart.
e) The outside diameter of your accessory
must be within the capacity rating of your
power tool. Incorrectly sized accessories can
not be adequately guarded or controlled.
Page 5