Flying Legends P-51D Mustang Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mainan Flying Legends P-51D Mustang. Flying Legends P-51D Mustang 16 halaman.

As the linkage for each control surface is completed in a similar manner, the elevator linkage is detailed in full here.

Section: Elevator Linkage

Step 1

Assembly begins with the fitting of your choice of elevator

servo in its pre-fitted mount in the first tailplane half. Note

the orientation of the servo. Use the mounting screws,

grommets and brass ferrules supplied with your servo

and ensure that the lead is drawn out of the tailplane

through the opening in the mount. Temporarily fit a servo

control horn as shown.

A Futaba BLS351 Servo was used on our prototype model.

Step 2

Measure the distance from the root face of the tailplane to

the control horn fitted in the previous step.

Step 3

Transfer this measurement onto a piece of masking

tape on the underside of the tailplane. Develop the

measurement for the thickness of the control horn, then

viewing from the opening in the tailplane, mark the length

of the slot required for free movement of the control horn

over the full range of servo travel.

Step 4

Using a rotary cutting disc or hand tools, cut a slot wide

enough for clearance on the servo control horn.