ASTRO TOOL Corp. ABOT4001 Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat crimp ASTRO TOOL Corp. ABOT4001. ASTRO TOOL Corp. ABOT4001 8 halaman. Battery powered crimp tool

Halaman Cetak
ABOT4001 REV1
BATTERY POWERED CRIMP TOOL
Identification

Specifications

Crimp Tool
Length=13.4" (340mm)
Width=2.9" (74mm)
Depth=4.3" (109mm)
Mass/Weight (with battery)=3.74lb (1.7kg)
Sound Level=75db (A) at 1 meter
2
Vibration=<2.5m/s
Hydraulic Oil=Shell Tellus® T-15
Crimp Capacities
Crimp Force=1.1 tons (13kN)
Avg. Crimp Time=2 seconds
Avg. Crimps per Charge=Approx. 150
Battery
Charging Voltage=18VDC
Charging Time=22 minutes
US Pat. No. 7,254,982
________________________________________________________________________________________________
ABOT4001 rev1-DS
©2014 Astro Tool Corp., All Rights Reserved
Figure 2
21615 SW Tualatin-Valley Hwy. Beaverton, OR 97003
Phone: 503-642-9853 Fax: 503-591-7766 Email: [email protected]

Operation

LED Work Light (White)
This LED automatically turns on when the trigger is pulled. It
remains on for 10 seconds after the trigger is released.
LED Indicator (Red)
This tool is equipped with a special circuit board
incorporating several important features to inform the user
about the current status of the unit. The red LED on the side
of the tool signals in the following cases:
What Happens...
Flashing for 2
seconds
Constant light for 20
seconds at end of
cycle
Tool will not start,
and constant light
for 20 seconds when
trigger is released
Tool stops, and
constant light for 20
seconds after trigger
is released
Tool stops, and
flashing light for 20
seconds after trigger
is released
Pressure Sensor
This tool is equipped with a pressure sensor that alerts the
user of an incomplete crimp.
If the tool is manually retracted before completion of
a crimp, the red LED and audible beep will be active
for 2 seconds.
If the tool is unable to reach the required crimp
force, the red LED, the work light, and an audible
beep will pulse until after the trigger is released.
Page 4 of 8
Astro Tool Corp.
DATASHEET
Signal
What it Means...
Battery is inserted in tool
••
Battery charge is below 17V at
____
beginning of cycle
Battery charge is below 16V at
____
beginning of cycle
Battery voltage drops below 13V
____
during cycle
Motor current exceeds 20A during
cycle
••••
Circuit has become too hot
REV. A
3/3/2016