Astro-Gadget EQStarPro Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Teleskop Astro-Gadget EQStarPro. Astro-Gadget EQStarPro 17 halaman.

EQStarPro User Guide

7.3.3. Indi-EQMOD: https://indilib.org/telescopes/skywatcher/eqmod.html

7.4. EQStarPro control via AstroBerry Server for Raspberry PI

A Raspberry Pi microcontroller can be used to control the EQStarPro using the AstroBerry

distribution. At minimum, a Raspberry Pi 3B is needed, but a Raspberry Pi 4 is recommended.

The AstroBerry Server precooked image has an official Raspberry PI Linux OS plus KStars, EKOS,

the Indi EQMOD plugin, and several planetarium programs, including Cartes du Ciel. See the

documentation link below for further details.

AstroBerry web site:

Online documentation can be found at

https://www.astroberry.io/docs/index.php?title=Astroberry_Server

8. Stand-alone mount control with push-button joystick.

8.1. Connect a push button joystick to port ST4.

8.2. After turning on the power to the EQStarPro, the device will emit 1 short, then 3 short and 1

long beeps. This means the EQStarPRO is ready to go and the mount will automatically start

tracking at stellar speed.

8.3. Changing the tracking speed is carried out with the Ra + button or the Ra- button while holding

the MODE button. Each speed selection is confirmed by short beeps as follows: one beep for

tracking stopped, two beeps for star speed, three beeps for lunar speed, and four beeps for

solar speed.

8.4. Changing the positioning (pointing) speed is carried out by the DEC + button or the DEC- button

while holding the MODE button. Each choice of speed is confirmed by long beeps as follows:

one beep - x20 speed, two beeps - x65 speed, three beeps - x200 speed and four beeps - x500

speed.

https://www.astroberry.io/