Canon 4318C002 Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Lensa Kamera Canon 4318C002. Canon 4318C002 18 halaman.

1. Attaching and Detaching the Lens

Lens mount index

Lens release button

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Turn the lens counterclockwise while pressing

the camera's lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera's instructions for

details.

Set the camera's power switch to OFF when

attaching or detaching the lens.

Attach the lens cap before detaching the lens

from the camera.

After detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

Contacts that are scratched, soiled, or have

Dust cap

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

The lens mount has a rubber ring to improve

dust-resistance and water-resistance

performance. This rubber ring may cause

friction marks to appear around the camera's

lens mount, although this will have no effect on

usage.

Rubber rings can be replaced at Canon Service

Center. (chargeable)

ENG-6