Canon CN10x25 IAS S/E1 Panduan Pengoperasian - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Lensa Kamera Canon CN10x25 IAS S/E1. Canon CN10x25 IAS S/E1 34 halaman. Zoom lens

Halaman Cetak
Canon CN10x25 IAS S/E1 Panduan Pengoperasian

4 MODE SETTING

4 MODE SETTING
4-1. OPERATION MODES
This product has an information display on which various settings can be customized. There are three oper-
ation modes below as a setting menu. One of the operation modes can be selected according to usage and
preference.
1. Basic mode : Items that can be set and viewed are limited in this mode, and are recommended to
2. Full mode
3. Analog mode : It is the mode chosen when not using a digital function at all
This manual describes only the items that can be set on the TOP screen in each mode.
For details on how to set them, refer to "Information Display Manual" in the supplied CD-ROM.
4-2. SETTINGS IN BASIC MODE
The following nine settings can be made on the top screen in Basic Mode.
Initial Top screen in Basic Mode
A 1
A 2
Item that is not scrolled
A 1
A 2
[ Z.M. ]
Items that are displayed by scrolling
For details on how to set them, refer to "Information Display Manual" in the supplied CD-ROM.
users who do not require complex settings. This product is factory-set to basic mode.
: All items can be set and viewed in this mode.
• Switches labeled VTR, RET, IRIS A/M, and IRIS INST control the respective functions. The rocker
switch serves as a regular zoom switch.
• AUX and MEMO switches are disabled.
• To set auto iris gain adjustment, use either display or trimmer operations.
• Shuttle shot, frame preset, speed preset, and zoom tracking are not available.
IG: 50
MENU
[Adj]
Fr1P
A
[Trk]OFF
Shtl
[I-Tq]H
Fr1P
MENU
IG: 50
Fr1P
[Trk]OFF
Fr1P
[I-Tq]H
1. Go to MENU screen
2. Auto iris gain settings
3. AUX switch assignment
4. Automatic adjustment of mechanical end
5. AUX1 switch assignment
6. Zoom tracking ON/OFF
7. AUX2 switch assignment
8. Iris torque settings
9. Zoom curve mode settings
E10