Canon EF 50mm f/1.8 II Instruksi

Jelajahi secara online atau unduh pdf Instruksi untuk Lensa Kamera Canon EF 50mm f/1.8 II. Canon EF 50mm f/1.8 II 2 halaman. Ef lens

Halaman Cetak

EF Lens

EF50mm f/1.8 II

Instruction

Thank you for purchasing a Canon product.

Safety Precautions

1. Do not look at the sun or a bright light source through

the lens or camera. Doing so could result in loss of

vision. Looking at the sun directly through the lens is

especially hazardous.

2. Whether it is attached to the camera or not, do not

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun's rays, which could cause a fire.

Handling Cautions

If the lens is taken from a cold environment into a warm

one, condensation may develop on the lens surface and

internal parts. To prevent condensation in this case, first

put the lens into an airtight plastic bag before taking it

from a cold to warm environment. Then take out the lens

after it has warmed gradually. Do the same when taking

the lens from a warm environment into a cold one.

Nomenclature

Focus mode switch

●

①

Lens mount index

●

②

Contacts

●

③

Focusing ring

●

④

1. Mounting and Detaching the Lens

See your camera's instructions for details on mounting

and detaching the lens.

• After detaching the lens, place the lens with the rear end

up to prevent the lens surface and contacts from getting

scratched.

• If the contacts get soiled, scratched, or have fingerprints

on them, corrosion or faulty connections can result. The

camera and lens may not operate properly.

• If the contacts get soiled or have fingerprints on them,

clean them with a soft cloth.

• If you remove the lens, cover it with the dust cap. To

attach it properly, align the lens mount index and the 

index of the dust cap as shown in diagram

clockwise. To remove it, reverse the order.

2. Setting the Focus Mode

To shoot in autofocus (AF) mode, set the focus mode switch

to AF

❹

To shoot in manual focus (MF) mode, set the focus mode

switch to MF, and focus by turning the focusing ring.

• Do not touch the rotating parts of the lens while AF is

active.

• Do not focus in MF when the focus mode switch is set to

AF.

, and turn

❶