Canon EF-S24mm f/2.8 STM Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Lensa Kamera Canon EF-S24mm f/2.8 STM. Canon EF-S24mm f/2.8 STM 2 halaman. Ef lenses
Juga untuk Canon EF-S24mm f/2.8 STM: Panduan Pengguna (16 halaman), Manual (11 halaman)

Canon EF-S24mm f/2.8 STM Petunjuk
EF Lenses
EF-S24mm f/2.8 STM
Instructions
Thank you for purchasing a Canon product.
EF-S24mm f/2.8 STM is a compact, lightweight, low-profile high quality wide-
angle lens.
"STM" stands for Stepping Motor.
Safety Precautions
Do not look at the sun or a bright light source through the lens or
camera. Doing so could result in loss of vision.
Looking at the sun directly through the lens is especially hazardous.
Whether it is attached to the camera or not, do not leave the lens under
the sun without the lens cap attached. This is to prevent the lens from
concentrating the sun's rays, which could cause a fire.
Handling Cautions
If the lens is taken from a cold environment into a warm one,
condensation may develop on the lens surface and internal parts. To
prevent condensation in this case, first put the lens into an airtight plastic
bag before taking it from a cold to warm environment. Then take out the lens
after it has warmed gradually. Do the same when taking the lens from a warm
environment into a cold one.
Do not leave the lens in excessive heat such as in a car in direct sunlight.
High temperatures can cause the lens to malfunction.
Usage Precautions
When using this lens, please check the Canon website for the latest camera
firmware. If the camera's firmware is not the latest version, be sure to update
to the latest firmware.
For details on updating firmware, please check the Canon website.
Cautions during shooting
This lens uses a stepping motor to drive the focusing lens (the lens that has
the job of focusing the shot).
1. Cautions when the power is off
Since the motor does not operate when the camera is off or has been
turned by the auto power-off function, take note of the following points.
• The focus cannot be adjusted in manual focus mode.
2. Cautions when the lens is in sleep mode
This lens has a sleep mode separate from the camera auto power-off
function for saving power when the lens has not been operated for a period
of time.
Since the motor does not operate when the lens is in sleep mode, even if
the camera is turned on, take note of the following points.
• The focus cannot be adjusted in manual focus mode.
• To recover the lens from sleep mode, press the shutter button halfway.
Nomenclature
Focus mode switch
Focusing ring
Lens mount index
Contacts
To retract the lens if extended, keep the lens attached to the camera, and
then autofocus at infinity or turn the focusing ring.
Conventions used in this instruction
Warning to prevent lens or camera malfunction or damage.
Supplementary notes on using the lens and taking pictures.
1. Mounting and Detaching the Lens
See your camera's instructions for details on mounting and detaching the
lens.
After detaching the lens, place the lens with the rear end up to prevent
the lens surface and contacts from getting scratched.
If the contacts get soiled, scratched, or have fingerprints on them,
corrosion or faulty connections can result. The camera and lens may not
operate properly.
If the contacts get soiled or have fingerprints on them, clean them with a
soft cloth.
If you remove the lens, cover it with the dust cap. To attach it properly,
align the lens mount index and the
clockwise
. To remove it, reverse the order.
2. Setting the Focus Mode
To shoot in autofocus (AF) mode, set the focus mode switch to AF
To shoot in manual focus (MF) mode, set the focus mode switch to MF, and turn
the focusing ring to set the focus
.
When the camera AF mode is ONE SHOT AF, focus manually by pressing
the shutter button halfway and turning the focusing ring. (Full-time manual
focus)
When turning the focusing ring suddenly, the focus adjustment may be
delayed.
The focus cannot be adjusted in MF mode while the camera is off.
Do not touch the front rotating parts of the lens while autofocus is active.
index of the dust cap, and turn
.