Canon XJ80x8.8B Panduan Pengoperasian - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Lensa Kamera Canon XJ80x8.8B. Canon XJ80x8.8B 44 halaman. Bctv zoom lens
Halaman Cetak
2-5 Iris Mode Setting
DIP switch (iris control select switch) SW2 No. 4 was set to the "OFF" position at the factory.
See the table below to find the relationship between the position of the switch and signals.
Iris mode
Iris control and operation depend on the following three signals
1
Enforced auto iris command signal from the camera system (IRIS ENF)
(Some camera models are not capable to provide this signal.)
2
AUTO/REMOTE iris command signal from the camera system (IRIS A/R)
3
Setting position of DIP switch (SW2) No. 4 inside the lens body
("ON" position: I.LOCAL/"OFF" position: I.CAMERA However, I.LOCAL may not be usable depending on the
specifications.)
The table below lists the relationship between these three signals and iris mode.
Position of the DIP switch
OFF
OFF
OFF
OFF
ON
ON
ON
ON
(Excluding UJ122x8.2B AF)
Command signal from camera
IRIS ENF
IRIS A/R
ON
Auto
ON
Remote
OFF
Auto
OFF
Remote
ON
Auto
ON
Remote
OFF
Auto
OFF
Remote
Iris Gain Adjusting Trimmer
IG
DIP1
DIP2
DIP switch
• UJ122x8.2B, UJ111x8.3B
• Models with the IESDA
operation system
E11
Iris Control signal from
Camera
Camera
Camera
Camera
Camera
Camera
Switch box
Switch box
VR2100
IG
SW2
SW1
Other models
2 PREPARATION
Iris mode
Auto iris
Remote iris
Auto iris
Remote iris
Auto iris
Remote iris
Remote iris
Remote iris