Astrolite LED CONTROLLER II Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Astrolite LED CONTROLLER II. Astrolite LED CONTROLLER II 3 halaman.

Halaman Cetak

D) Auto mode: In Auto mode, press FUNCTION button after entering this mode, the displayer will

display correspondingly SP01 or FS00 or FD00. "SP", "FS" & "FD" denote respectively

color-changing speed, strobe speed & step speed. Press UP & DOWN to adjust respectively

color-changing speed between 01 to 100, corresponding time between 0.12s to 6s, strobe speed

between 00 to 99, corresponding speed between 25Hz to 0.5Hz, step speed between 0 to 10s.

Channel

CH1

Mode

Select

internal

program

(128)

Red

5. CLEANING AND MAINTENANCE

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth.

Never use alcohol or solvents! There are no serviceable parts inside the device. Maintenance and

service operations are only to be carried out by authorized dealers.

6. TECHNICAL SPECIFICATIONS

Power supply: 220 V AC, 50 Hz ~

DMX 512-output: 3-pin XLR-connector

4-pin signal sockets

Output voltage 24V, 12A current

Dimension; 359mm x 164mm x65mm

Weight: 2.70kgs

Please note: Any information is subject to change without prior notice.

CH2

CH3

Output

Strobe

No function

Control

Speed

Green

Blue

CH4

CH5

Step

No function

Speed

Output

Strobe

Step Speed

Control

Speed

CH6