COLDBUSTER FLOORHEATING MCD5 Panduan Pengguna Referensi Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna Referensi Cepat untuk Termostat COLDBUSTER FLOORHEATING MCD5. COLDBUSTER FLOORHEATING MCD5 5 halaman.
Halaman Cetak
CHILD LOCK:
Enable Child Lock: Press main menu button, press USER settings.
The 1
st
option at the top is CHILD LOCK. Press on CHILD LOCK. What
appears is a digital slide switch. See image on the right. Press on the right-
hand side of OFF. It should now say ON. To confirm this setting press the
button on the lower right corner of the screen. It will now revert to User
Options.
Press the Left(back) button twice to get back to the Default Screen Page.
The child lock will be activated after about 2 minutes when the screen saver
activates. The image on the right is what you'll get if you touch the screen
saver
DISABLE Child Lock: With the child lock screen activated, i.e., the
"3 hotplates" appear. See image to the right.
Draw an "L" on the screen in a single stroke without lifting your finger
from the screen. Start by touching the dot in the circle in the upper left
corner, then slide your finger downwards to the dot in the circle in the lower
left corner and continue sliding your finger to the dot in the circle in the lower
right corner, forming an "L".
If done correctly, the home screen will appear.
Please note that the child lock will be reactivated when the thermostat
returns to screen saver mode – unless it is deactivated in the menu: User
Settings/Child Lock. i.e., do as above in Enable Child Lock, but now just tap to the left of ON etc.
ADAPTIVE FUNCTION:
The thermostat has the ADAPTIVE FUNCTION defaulted too ON.
Adaptive Function is a setting that enables the thermostat to switch on prior to the set time to be warm by
the set time. The thermostat has intuitive technology, which, as it knows what the floor temp is & what the
time is. It can work out the rate of temperature change and thus switch on at the appropriate time
beforehand so that it will be at the temp as set in the programming schedule at that scheduled time.
This a very handy feature when in "Floor" sensor mode. Please be aware if you have the Adaptive Function
on & set your thermostat to Room Limit or Room sensor mode this could dramatically
increase you running costs
Press main MENU button, Scroll down and press ENGINEER settings.
It's the 1
To switch Adaptive Function OFF. Tap the grey area to the left of ON.
Do the opposite should you wish to turn it ON.
ENERGY USE
The thermostat has a section on how much your floor heating is costing you to run.
Press the MENU button & then Energy Use button.
It will bring up the 7-day usage graph. Tap on the
This gives you a breakdown of KWh & Price for the last Week, Month & Year.
Should your thermostat be switching on heating to a large floor area, you could be
getting inaccurate readings. Please contact CB to assist you here.
The thermostat calculates the energy use based on a fixed electrical tariff. Should
your home have a "smart" electricity meter, which charges different tariffs for
electricity consumption at different times of the day and hence will not be providing an
accurate running cost.
If you keep on scrolling through the energy use page there will also be a running cost graph for last month
& last year. The graph is indicating hour on per day.
st
option. Tap on it.
arrow button.