Coldelite KW-77 Panduan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Dispenser Minuman Coldelite KW-77. Coldelite KW-77 15 halaman. Counter model whipped topping dispenser

Trouble-shooting Guide
Problem Encountered
1) With power ON, no product
dispenses From machine
2) Product dispenses poorly
whipped and / or wet looking
3) Product dispenses slowly or
intermittently
4) Does not dispense product when
Dispense Button pressed and
motor runs
5) Mix does not stay cool, but
machine is dispensing and running
6) Dispense button does not
activate pump drive motor
7) No switch functions working or
touch pad illumination
Possible Cause
A) Pump knobs loose.
B) Texturizer clogged.
C) Pump Gears Worn.
A) Liquid mix has separated.
B) Suction hole size too large.
C) Pump and/or texturizer clogged.
D) Texturizer tube worn.
A) No liquid mix in tank.
B) Suction tube hole too small.
C) Orings / seals worn or damaged.
A) Pump bearing locked up
B) Pump drive belt worn or broken
A) Refrigeration Problem
A) Switch or motor problem
A) No power coming to the machine
B) Switch or transformer problems
Suggested Remedy
A) Tighten knobs.
B) Disassemble and brush clean, sanitize and reassemble
C) Replace pump gears.
A) Drain machine, clean, sanitize and restart with fresh mix.
B) Adjust suction tube to a smaller size hole (Set to right).
C) Drain machine, clean, sanitize and restart with fresh mix.
D) Replace plastic texturizer tube.
A) Refill mix tank with liquid mix.
B) Adjust suction tube lever to larger hole size.
C) Replace and lubricate ALL orings and seals.
A) Call a Coldelite Authorized Service Company
B) Call a Coldelite Authorized Service Company
A) Call a Coldelite Authorized Service Company
A) Call a Coldelite Authorized Service Company
A) Check power supply
B) Call a Coldelite Authorized Service Company