Canon BJC-S830D Petunjuk Penyiapan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Penyiapan untuk Perangkat lunak Canon BJC-S830D. Canon BJC-S830D 2 halaman. Canon bjc-s830d: setup instruction

Halaman Cetak

Install the Printer Driver (Windows

)

Be sure to TURN THE PRINTER OFF before

continuing.

POWER

Lamp

Button

NOTE: For Windows

XP or Windows 2000, log on

to Windows as a member of the Administrators

group before continuing.

IMPORTANT: If you see the Add New

Hardware Wizard, click Cancel.

Close any open software applications,

then insert the "S830D Setup Software &

User's Guide" CD-ROM. The setup program

should run automatically.

NOTE: If the setup program does not run,

click Start, then Run, then type D:\msetup.exe,

where D is your CD-ROM drive.

Read the License Agreement, then

click Yes, if you agree.

When the main menu appears, make

sure that the Printer Driver is selected,

then click Install.

NOTE: If you are prompted to restart Windows,

remove the CD-ROM, then click OK. After the

computer restarts, insert the CD-ROM and

continue.

When the Printer Port window appears,

TURN THE PRINTER ON so the printer port

(connection) can be automatically detected.

The software will begin identifying the

printer port being used.

IMPORTANT: If your computer cannot

detect a printer port, refer to the

Troubleshooting chapter in the "S830D

Quick Start Guide" for instructions.

When the Terminate Installation window

appears, click OK.

Follow the on-screen instructions to continue

with Product Registration.

NOTE: Remember to register your product

to ensure product support. The serial number

is located on the inside of the printer, to the

right of the print head.

When the main menu appears, make

sure that Other Driver is selected, then

click Install.

After installing the Other Driver successfully,

continue by making sure that Application is

selected, then click Install.

When the Terminate Installation window

appears, click OK, then Exit.

NOTE: For more information. refer to the

"S830D Quick Start Guide" or view the

electronic documentation on the CD-ROM.

Click Yes if you are prompted to restart

your computer

To ensure highest quality output, continue

with Step 7 Align the Print Head.

Install the Printer Driver (Macintosh

IMPORTANT: Drivers that ship with this

printer support Mac

OS 8.6-9.X. For Mac

OS X driver and instructions, go to our

Web site at www.canontechsupport.com.

Turn on your Mac and insert the "S830D

Setup Software & User's Guide" CD-ROM.

Open the Printer Driver folder on the

CD-ROM, then double-click the Installer icon.

Read the License Agreement and click

Accept, if you agree.

Click Install. The printer driver will load

automatically.

If the message "No other applications can be

running..." displays, click Continue.

When the "Installation was successful"

screen displays, Restart your computer.

NOTE: Register your product to ensure product

support. The serial number is located on the

inside of the printer, to the right of the print

head.

)

After the computer restarts, TURN THE

PRINTER ON. Select the Apple menu,

then Chooser.

Click the S830D icon in the Chooser. The

printer name will highlight and move to

the right panel.

NOTE: To use the BJ Print Monitor, click the

Backgrounding button to the On position.

Close the Chooser.

Access your "S830D Setup Software &

User's Guide" CD-ROM again. Open the

Memory Card Utility folder and double-click

the BJ Installer icon.

Follow the on-screen instructions. When the

"Installation is completed" screen appears,

you can choose to Restart Now, or click Quit,

and access your CD-ROM again.

From the Application folder, double-click on

the software to be installed.

Follow the on-screen instructions. When the

"Installation has Finished" screen appears,

click OK.

NOTE: For more information, refer to the

"S830D Quick Start Guide" or view the

electronic documentation on the CD-ROM.

When prompted, restart your computer.

To ensure highest quality output, continue

with Step 7 Align the Print Head.

Align the Print Head

Before using the printer, align the print head to

ensure the best quality printing.

Add a stack of blank paper to the sheet feeder.

Start the alignment procedure.

Windows:

a. For Windows XP, select Start, then Control

Panel. Then click on Printers and Other

Hardware, then Printers and Faxes.

NOTE: For other Windows versions, click

Start, then Settings, then Printers.

b. Right-click the Canon S830D icon, then

click Properties.

c. Click the Maintenance tab, then click the

Print Head Alignment icon.

Macintosh:

a. From the File menu in a software

application, click Page Setup.

b. Click the Utilities button.

c. Click the down-arrow to select Test Print.

d. Click the Print Head Alignment icon.

Click Yes (Windows) or OK (Macintosh) when

prompted if the pattern printed successfully.

Compare the different patterns for each color on

the printout:

For each color on the test printout, enter the

number in the Print Head Alignment window

that corresponds with the smoothest looking

test pattern.

Click OK (Windows) or Send (Macintosh) when

finished.

Part no. QA7-2142

Canon is a registered trademark of Canon Inc.

CompactFlash is a trademark of SanDisk Corporation.

All other products and brand names are registered

trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

Printed in Thailand

40-42249-0402