Displaying the Edit Window
You can enlarge a single image and perform detailed edits on it in the edit window.
You can display multiple edit windows and edit them while comparing each of them (up to 36 images can be displayed).
This chapter describes the functions that you can operate in the edit window only.
For instructions on operating the functions common to those in the main window, refer to the page described with each item.
Double-click a thumbnail
image in the main window.
The edit window appears.
A low resolution image is
displayed first in the edit window,
and then it switches to a high
resolution image.
Alternatively, you can display this
window by selecting [File] menu
[Open in Edit window].
Image display area
Displays the coordinates of the
cursor position and the RGB values
(8-bit conversion) of an image.
To display or hide the tool palette, select the [View] menu
To quit the edit window, select [File] menu
Menu bar
Displays the [Digital Photo Professional],
The path for the image and
[File], [Edit], [View], [Adjustment], [Tools] and
file name are displayed.
[Window] menus.
Displays the operation mode (p.1-20).
Displays the color space ([RAW] is displayed for RAW images)
of the image and the work color space (p.1-9, p.1-21).
When you set CMYK simulation profile (p.1-21), [CMYK] is displayed.
The CMYK simulation display can be canceled temporarily by holding
down the <space> key on the keyboard.
[Tool palette].
[Close Window].
Edit Window
For some images, it may take some time to switch to the high resolution image.
You can select whether the tool palette is displayed as another window or displayed
within the same window (p.1-21).
For information on shortcut keys, refer to the "Shortcut List" (p.5-2).
Tool palette
RAW image adjustment tab sheet (p.2-3)
RGB image adjustment tab sheet (p.2-6)
If you set the tool palette to [Docking display] (p.1-21) and
make the edit window large, a thumbnail of the image will be
displayed. (When the tool palette is set to [Floating display]
(p.1-21), the thumbnail image is always displayed.) The
enlarged display position is displayed on the thumbnail and
you can move the display position by dragging.
Cover/Table of
Contents
Introduction
Displaying Thumbnail Images
1
and Performing Basic Edits
in the Main Window
2
Performing Detailed
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Displaying an
4
Image in the Quick
Check Window
5
Reference
Index
2-2
Halaman Cetak