DADO Door Master Controller Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengontrol DADO Door Master Controller. DADO Door Master Controller 20 halaman.

Introduction to the Dado Door Master Controller

The Dado Door sliding door automation system is a sophisticated software and

hardware solution for automating sliding doors. Contrasting the typical industrial

automations system, the Dado Door system is designed for high end residential

applications which demand quiets, smooth, elegant, reliable operation. Significant

effort has gone into engineering the track automation to produce an extremely

reliable and efficient product that requires basically no maintenance. In the

majority of installs, once calibrated, the system rarely if ever needs further attention.

There are two aspects of the Dado Door automation system. The first part of the

install is the hardware installation. The second part is programming the door to fit

the application. This manual covers the programming aspect of the installation,

and assumes that a door has been attached to the track and is ready to be

calibrated. Each phase requires attention to detail to insure a positive install

experience in addition to a positive homeowner enjoyment after installation.

The Master Controller contains a simple and easy to follow menu directory of

settings.

When changing a setting, they are stored permanently. This manual will

cover all aspects of the menu. It is advised that the installer do not make any

changes to a setting without first reviewing the manual.

It is advised that the Master Controller be installed in a manner so that it is easy to

get access to if future adjustments are required. Do not install in a room(ie attic or

basement) such that there may be significant temperature fluctuations, moisture, or

excessive dust accumulation. It is ideal to have a line of sight from the Master

Controller to the door when possible for easy programming. During the install and

calibration, it is best to plan for easy access to the motor and Master Controller, as

the most frequent problems experienced by installers are due to wiring and

connection problems. When the motor and Master Controller are easily accessible,

troubleshooting wiring problems is a quick and easy process.

Although much effort has gone into methods to make the door system as safe as

possible, the is always some potential risk that the Dado Door automation system

may cause bodily harm to persons or pets that are in the door's path. Use a

common sense approach as to where and how this system is installed.