Daedalus Sparrow Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Mesin Jahit Daedalus Sparrow. Daedalus Sparrow 20 halaman. Spinning wheels

Changing the Bobbin

When it's time to change your bobbin, simply slip off the tension belt,

lift the rear end of the flyer and rotate the assembly to either side.

The maiden pivots freely, so the drive belt almost never needs to be

removed. Keep track of the small rear bearing by placing it back onto

the rear magnets until you can get the new bobbin installed. With the

new bobbin on the flyer shaft, replace the rear bearing and rotate the

assembly back onto the chassis, making sure the small rear bearing

goes back onto the magnets. Replace the tension belt and you are

ready to spin again!

When set up for Irish, your drive belt is on the bobbin so you'll simply

slip that off before removing the bobbin.