DAELECTRONICS iCtrl-R-mini Panduan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Perekaman DAELECTRONICS iCtrl-R-mini. DAELECTRONICS iCtrl-R-mini 8 halaman. Pocket midi controller
Juga untuk DAELECTRONICS iCtrl-R-mini: Panduan Operasional (8 halaman), Panduan Operasional (8 halaman), Panduan Operasional (8 halaman)
Halaman Cetak
External Expression pedal
When an expression pedal is connected to an iCtrl-R mini , it will be always active and communicates via the control change # 7 (values f rom 01 to
127). In addition when the pedal is set at minimum heel a CC #66 with value =0 will be sent after 800 millisecond, a CC #66 with value =127 will be
sent when the pedal is at maximum toe setting after 800ms. You can then switch on off an effect to be controlled by the expression pedal assigning
CC #66 to it.
Vslider
It's a motion detection sensor located on the right side of the box that is always active and communicates via the control change # 1 (values
from 01 to 127).
With this sensor you can send continuous MIDI CC by moving back and forth the foot or the hands from the sensor. Led #9 will be off (a CC #55 with
value =0 will be sent) after 800ms when you move away the foot or the hand from the sensor. Led #9 will be on and a CC #55 with value =127 will
be sent after holding the foot in front of the sensor for 800ms. You can then switch on off an effect to be controlled by the Vslider assigning CC
#55to it.
5