Doremi DCP-2000 Prosedur Penggantian - Halaman 7
Jelajahi secara online atau unduh pdf Prosedur Penggantian untuk Server Doremi DCP-2000. Doremi DCP-2000 11 halaman. Digital cinema servers ssd flash replacement procedure for supermicro x7sbe motherboard fitted units

3.2 SSD Flash Location
The SSD flash is located on the front of the unit, beside the HDD, as presented below:
Card holding the
HDDs
HDDs
SSD flash
(a)
(b)
Figure 5: SSD Flash Location – (a) DCP-2000, (b) DCP-2K4
The SDD flash is located on top of the USB hub, secured with a screws and connected
with its IDE-10 connector plugged into the USB hub header.
3.3 SSD Flash Removal
Unscrew the SSD flash from its holding card using a Philips tip screwdriver as presented
below:
Figure 6: SSD Flash Screw Removal
Then, unplug gently the SSD flash from the card's connector by pulling on the SSD flash:
Connector
previously holding
the SDD flash
Figure 7: SSD Flash Removed
D2K.DP.000804.DRM
Page 7
Version 1.0
Doremi Cinema LLC Confidential