Asus 815 Panduan Pengguna - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Asus 815. Asus 815 27 halaman. Intel 815 microatx motherboard

3. HARDWARE SETUP

17) USB Headers (12-1 pin USB2)

If the USB Ports on the back panels are inadequate, a USB header is available

for two additional USB ports. Connect the 12-1 pin ribbon cable from the pro-

vided 2-port USB connector set to the midboard 12-1 pin USB header and mount

the USB connector set to an open slot on your chassis.

CUSL-L

CUSL-L USB Header

18) ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power sup-

ply will only insert in one orientation because of the different hole sizes. Find the

proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT:

Make sure that your ATX power supply (minimum recommended

wattage: 200 watts; 235W for a fully-configured system) can supply at least 20

amperes on the +5-volt lead and at least 10mA (750mA recommended) on the +5-

volt standby lead (+5VSB). Your system may become unstable/unreliable and may

experience difficulty in powering up if your power supply is inadequate. For Wake-

On-LAN support, your ATX power supply must supply at least 750mA +5VSB.

CUSL-L

CUSL-L ATX Power Connector

USBPORT

CUSL-L User's Manual