Asus 90MB0YQ0-M0EAY0 Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Motherboard Asus 90MB0YQ0-M0EAY0. Asus 90MB0YQ0-M0EAY0 28 halaman.
Halaman Cetak•
Actual lighting and color will vary with LED strip.
•
If your LED strip does not light up, check if the RGB LED extension cable and the
RGB LED strip is connected in the correct orientation, and the 12V connector is
aligned with the 12V header on the motherboard.
•
The LED strip will only light up when the system is operating.
•
The LED strips are purchased separately.
DDR4 DIMM slots
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered DDR4 DIMMs into these DIMM
sockets.
For more details, refer to System memory.
M.2 socket 3
This socket allows you to install M.2 (NGFF) SSD
modules.
•
The M.2 socket supports PCIe 3.0 x4 mode and SATA mode M Key design and
type 2242 / 2260 / 2280 / 22110 storage devices.
•
The M.2 Socket shares bandwidth with the SATA_5/6 ports, and therefore the
SATA_5/6 ports cannot be used when an M.2 device is installed.
AMD Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the two
pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and enter
BIOS setup to re‑enter data.
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
ASUS TUF B450M-PLUS GAMING
M.2(SOCKET3)
22110
2280
2260
2242
CLRTC
PIN 1
1‑3