Asus 90MB0ZV0-M0EAY0 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Motherboard Asus 90MB0ZV0-M0EAY0. Asus 90MB0ZV0-M0EAY0 27 halaman.

ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)

Correctly orient the ATX power supply plugs into these connectors and push down

firmly until the connectors completely fit.

•

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside

the system may damage the motherboard components. These are not jumpers! Do not

place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan

of maximum 0.5A (12 W) fan power.

Intel

LGA1151 CPU socket

Install Intel

designed for 9th / 8th Gen Intel

For more details, refer to Central Processing Unit (CPU).

DDR4 DIMM slots

Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these

DIMM sockets.

For more details, refer to System memory.

USB 3.1 Gen 1 (up to 5Gbps) connector (20- 1pin U31G1_12)

Connect a USB 3.1 Gen 1 module to this connector for additional USB 3.1

Gen 1 front or rear panel ports. This connector complies with USB 3.1 Gen 1

specifications and provides faster data transfer speeds of up to 5 Gbps, faster

charging time for USB-chargeable devices, optimized power efficiency, and

backward compatibility with USB 2.0.

1-2

For a fully configured system, we recommend that you use a power supply unit

(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides

a minimum power of 350 W. This PSU type has 24-pin and 8-pin power plugs.

DO NOT forget to connect the 8-pin EATX +12V power plug. Otherwise, the system

will not boot up.

We recommend that you use a PSU with higher power output when configuring a

system with more power-consuming devices or when you intend to install additional

devices. The system may become unstable or may not boot up if the power is

inadequate.

LGA1151 CPU into this surface mount LGA1151 socket, which is

Core™, Pentium

Gold and Celeron

Chapter 1: Product introduction

processors.