Asus A58M-E Manual - Halaman 19

Jelajahi secara online atau unduh pdf Manual untuk Motherboard Asus A58M-E. Asus A58M-E 47 halaman.
Juga untuk Asus A58M-E: Panduan Pengguna (47 halaman)

Halaman Cetak

To erase the RTC RAM:

Turn OFF the computer and unplug the power cord.

Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3

for about 5-10 seconds, then move the cap back to pins 1-2.

Plug the power cord and turn ON the computer.

Hold down the <Del> key during the boot process and enter BIOS setup to re-

enter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default

position. Removing the cap will cause system boot failure!

•

If the steps above do not help, remove the onboard battery and move the jumper

again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the

battery.

•

You do not need to clear the RTC when the system hangs due to overclocking. For

system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature.

Shut down and reboot the system, then the BIOS automatically resets parameter

settings to default values.

1.7

Connectors

1.7.1

Rear panel connectors

PS/2 Mouse port (green). This port is for a PS/2 mouse.

Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other

VGA-compatible devices.

LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)

through a network hub.

ASUS A58M-E

4 5

1-11