Asus AT5NM10-I Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Asus AT5NM10-I. Asus AT5NM10-I 43 halaman. User manual

System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

•

System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED

cable to this connector. The system power LED lights up when you turn on the system

power, and blinks when the system is in sleep mode.

•

Hard disk drive activity LED (2-pin HD_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable

to this connector. The HD LED lights up or flashes when data is read from or written to

the HDD.

•

ATX power button/soft-off button (2-pin PWRBTN)

This connector is for the system power button. Pressing the power button turns

the system on or puts the system in sleep or soft-off mode depending on the BIOS

settings. Pressing the power switch for more than four seconds while the system is ON

turns the system OFF.

•

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without

turning off the system power.

LVDS connector (30-pin CON1)

This connector is for a LCD monitor that supports Low-voltage differential signaling

(LVDS) interface.

ASUS AT5NM10-I

E5179_AT5NM10-I.indb 16

1-16

12/22/09 5:56:05 PM