Asus AT5NM10T-I NA Panduan Pengguna - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Asus AT5NM10T-I NA. Asus AT5NM10T-I NA 42 halaman. User manual
Juga untuk Asus AT5NM10T-I NA: Panduan Pengguna (43 halaman)
Halaman Cetak
7.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector. Both CPU and
chassis fan
These fan connectors are not jumpers! Do not place jumper caps on the fan connectors!
AT5NM10T-I Fan connectors
8.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
AT5NM10T-I Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Select item in the BIOS setup to [HD Audio]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD Audio]. See section 2.4.3 Onboard Devices Configuration for
details.
1-13
CHA_FAN
CPU_FAN
PORT2 L
SENSE2_RETUR
SENSE_SEND
PORT2 R
SENSE1_RETUR
PORT1 R
PRESENCE#
PORT1 L
GND
PIN 1
HD-audio-compliant
pin definition
AAFP
Line out_L
NC
NC
Line out_R
NC
MICPWR
NC
MIC2
AGND
PIN 1
Legacy AC'97
compliant definition
Chapter 1: Product introduction