Daessy DSAM4 Manual Petunjuk Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Kursi roda Daessy DSAM4. Daessy DSAM4 6 halaman. Swing aside mount

Install the Total Quick Release Base – TUSB

Remove the foam plug retaining the Pinch Clamp in its hole in the TUSB and slide it onto the Horizontal

Tube. The Pinch Clamp must be aligned in its hole so that it is even with the inside of the tube hole to

allow the tube to slide through.

1. Loosen the cable anchor bolt and slide the anchor off the end of the horizontal

tube.

the TUSB is with the Locking Pin positioned away from the user. Adapters and Holders that attach

devices and computers onto the TUSB are assembled for this orientation.

Ensure that all of the fasteners are tight including; frame clamp, swivel clamp, and pinch clamp.

Printed in Canada

2. Slide the TUSB onto the Horizontal

Tube. The Pinch Clamp must be aligned

in its hole so that it is even with the inside

of the tube hole to allow the tube to slide

through.

3. Position the angle of the quick release base and tighten the

Pinch Clamp bolt firmly to hold the TUSB in place.

4. Reinstall the cable anchor and firmly tighten the anchor bolt.

The Total Quick Release Base can be clamped at any location

along the Horizontal Tube and may be rotated around the tube to

place the mounted device at any angle. The normal orientation for

Manufactured by Daedalus Technologies in Canada

Swing Aside Mount Assembly

www.daessy.com

DSAM4

Page 6 of 6