Canon REALiS SX80 Mark II D Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Canon REALiS SX80 Mark II D. Canon REALiS SX80 Mark II D 25 halaman. Projector
Juga untuk Canon REALiS SX80 Mark II D: Panduan Produk (12 halaman), Panduan Produk (13 halaman), Brosur & Spesifikasi (12 halaman), Panduan Tambahan (10 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (4 halaman), Panduan Produk (18 halaman), Fitur (19 halaman), Panduan Pengguna (1 halaman), Panduan Produk (10 halaman), Brosur (27 halaman), Pertanyaan yang Sering Diajukan (1 halaman), Spesifikasi Produk (2 halaman), Panduan Pengguna (2 halaman), Brosur (2 halaman), Brosur (32 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (12 halaman), Fitur & Spesifikasi (3 halaman)

Halaman Cetak
Canon REALiS SX80 Mark II D Panduan Pengguna
CHAPTER 1 • Introduction
■
For LV Series
When using LV series, specify an IP address of the projector for discovery.
Note
Configure LV series with the following procedures.
1
From [Discovery setting] of the [Option] menu, select [LV series] to configure.
[Discovery settings] dialog will display.
2
Place a checkmark in [Enable LV series].
Remove a checkmark if it is not used for discovery.
3
Select the [IP address] tab and click the [New] button.
[Specify IP address] dialog will display.
8
-
With LV series, you can not discover using broadcast addresses or IP
address ranges.
-
With LV series, it is recommended to use a fixed IP address for the
projector. If DHCP is configured to automatically assign IP addresses, you
will need to reconfigure this software everytime the projector's IP address
changes.