daewon DIB-N830 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Kamar Mandi daewon DIB-N830. daewon DIB-N830 20 halaman.

Halaman Cetak

Expert mode

Automatic deodorize on/off

This feature can be set regardless seat sensor override.

Select Water temperature while Stop is selected and

held to initiate/cancel the automatic deodorize.

2 LEDs(green/red) of the energy saving blink with 1

beep when it is activated and only 1 LED (red) blinks

with 2 beeps when it is deactivated.

Automatic pulsation wash on/off

Deactivate the seat sensor override.

Select water pressure +/- simultaneously to enter

automatic pulsation wash setting mode.

Select and hold Rear wash for 3 seconds to initiate/

cancel automatic oscillation rear wash. 2 LEDs(green/

red) of the energy saving blink with 1 beep when it

is activated and only 1 LED (red) blinks with 2 beeps

when it is deactivated. Front wash, Turbo wash and

Child wash can be set in the same way.

In the case of Child wash, Child pulsation wash is

deactivated first instead of being activated as it is set

basically.

20sec front wash → 20sec front oscillating wash →

20sec front oscillating/pulsating wash.

Automatic oscillation wash on/off

Select nozzle position ◀ ▶ simultaneously to enter

automatic oscillation wash setting mode.

Select and hold Rear wash for 3 seconds to

initiate/cancel automatic oscillation rear wash. 2

LEDs(green/red) of the energy saving blink with 1

beep when it is activated and only 1 LED (green)

blinks with 2 beeps when it is deactivated. Front

wash and Child wash can be set in the same way.

In the case of Child wash, Child oscillation wash is

deactivated first instead of being activated as it is

set basically.

20sec front wash → 20sec front oscillating wash →

20sec front oscillating/pulsating wash

Expert mode

기본기능

Water pressure and nozzle position change

Activate the seat sensor override

Basically, the water pressure and nozzle position are

stored and are maintained from the previous user's

settings, but these can be ignored and automatically

be changed to the presets as soon as the seat is

unoccupied.

Adjust the nozzle position and water pressure and

select and held Rear wash for 3 seconds.

2 LEDs(green/red) of the energy saving blink with 1

beep when it is activated and only 1 LED (red) blinks

with 2 beeps when it is deactivated. Front wash, Turbo

wash and Child wash can be set in the same way.

Adjust the dryer temperature and select and held Dry

simultaneously

for 3 seconds.

2 LEDs(green/red) of the energy saving blink with 1

beep when it is activated and only 1 LED (red) blinks

with 2 beeps when it is deactivated.

Silence mode on/off

Select water pressure "-"while Stop is selected and

held to lower the volume of the beep sound.

The volume of the beep sound will be lowered after

getting out of Expert mode.

simultaneously

3 seconds