Canon Selphy CP710 Panduan Perangkat Lunak Printer - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Perangkat Lunak Printer untuk Perangkat lunak Canon Selphy CP710. Canon Selphy CP710 28 halaman. For windows
Juga untuk Canon Selphy CP710: Panduan Tambahan (6 halaman), Panduan Perangkat Lunak Printer (33 halaman)
Halaman Cetak
The battery capacity of the printer is insufficient.
Please connect AC adapter and press [Resume] to resume, or click
[Cancel] to stop printing and replace the battery.
Cause :
The printer's battery charge is running low. The printer will not
work.
Correction : Use a new or fully charged battery pack, or use the printer with the
AC adapter (compact power adapter) connected.
■
Errors where printing is canceled
If any of the following messages appear, printing is canceled. After using the
recommended solution to clear the error, you need to start the print job over
again.
Paper jammed in printer.
Clear the jam as follows, then try printing again.
1. Remove the paper that caused the error.
2. Turn printer off and back on.
Cause :
Paper is jammed inside the printer while printing, or there is
paper still inside the printer before printing starts.
Correction : After closing the dialog, turn the printer off and then back on again.
Paper is automatically ejected from the print receptacle or the paper
handling slot. Remove the paper and then turn the printer off and
back on again a second time, and start the print job over.
Problem with ink cassette.
Correct as follows, then try printing again.
1. Check the state of the ink cassette.
2. Turn printer off and back on.
3. Remove the paper that caused the error.
Cause :
There is a problem with the ink cassette.
Correction : Take out the ink cassette from the printer. Remove any slack from the
ink sheet and then insert the ink cassette back into the printer. If the
problem still continues, replace the ink cassette with a new one.
27