BOLEX H Declic Petunjuk Penggunaan Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Aksesori Kamera BOLEX H Declic. BOLEX H Declic 6 halaman. Hand grip

This hand grip is designed for use with the

H16 and H8 cameras with flat bases. A quick

attachment device enables it to be mounted

and removed instantaneously.

An adapter

(fig. 1) fitted to the camera base enables the

hand grip to be locked in position when the

lever (b) is operated (see fig. 3).

1. Mounting the adapter on the camera

The adapter should be fitted into the forward

threaded hole in the camera base (see fig. 2).

On fig. 1, note the locking pin (c). This fits

into the groove (d) in the camera base

(fig. 2). To safeguard against any possible

play, proceed as follows: -

Fig. 1

Loosen screw (s).

b-+f-:--=-I

Place the locking pin (c) in the groove in

the camera base; screw up and slightly

tighten the screw (a) of the adapter using

a screwdriver or a coin.

Tighten the screw (e). When turned, this

screw opens the jaws which form the two

parts of the locking pin, thus eliminating

all play between the sides of the groove

and the pin.

Tighten screw (a) firmly.

2. Mounting the hand grip on the camera

After screwing the adapter on to the camera,

mount the hand grip as follows

Press the locking catch (f) to free the

lever (b).

•

Move the lever back, as shown in fig 3.

The attachment device is now « open

».

Place the platform of the hand grip

against the base of the camera, so that

the adapter fits into its seating.

Fig.2