Akyga AK-QIR-01B Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor Akyga AK-QIR-01B. Akyga AK-QIR-01B 4 halaman.
Halaman Cetak
AK-QIR-01B - user manual
Type clasification
Type A - narrower side of USB port is directed up towards
ź
the screen.
Type B - wider side of USB port is directed down towards
ź
the back cover.
Adapter assembly
1. Make sure that the adapter has plug in corresponding type with your device. The socket
must be compatible with adapter's plug, so that after installing adapter in the device you
can put it on the back of the device.
2. Place the adapter's plug in device's socket.
3. Gently tilt the adapter so that it is on the back of the device.
4. Make sure that adapter fits in back cover. If not, you can place adapter in device case.
Removing the most common problems
Problem
A device connected via
adapter qi does not
charging
Slow charging process
Cause
No mains voltage
Bad phone position
There is a suspicion of a
product defect
Bad adapter position
Too long distance
between the chager and
the phone
Type A
Screen
Back cover
Solution
Check the correct connection of
ź
the adpater to the mains socket
Check the mains fuses
ź
Place the phone directly on the
ź
charging surface
Place the phone with the back
ź
side in the center of the
charging surface
Do not charge your phone close
ź
to intense magnetic field
sources
Stop using and contact with
ź
seller
Place the adapter directly on
ź
the charging surface
Do not charge your phone close
ź
to intense magnetic field
sources
Take off the case
ź
Place the phone with the back
ź
side in the center of the
charging surface
Do not place any objects
ź
between the charginng surface
and the phone while charging
Clean the charging surface and
ź
back side of the phone
Type B
Screen
Back cover
p. 3