Canon LV-7105 Panduan Pemilik - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Canon LV-7105. Canon LV-7105 40 halaman. Micro-portable multimedia projector
Juga untuk Canon LV-7105: Brosur & Spesifikasi (2 halaman)

Halaman Cetak
VIDEO MODE
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
SYSTEM and press the SELECT button. Another dialog box
SYSTEM MENU will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to "Auto", and then press the SELECT
button.
When the Video signal is from the VIDEO or the S-VIDEO JACK
Auto
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M or PAL-N, select the system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce the proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Auto
The projector automatically detects the incoming Video signal, and
adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce the proper video image, it is
necessary to select a specific component video signal format among
480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN
box SCREEN MENU will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the screen size that you want to set,
and then press the SELECT button.
Regular
Normal Video Image size with 4 x 3 aspect ratio.
Wide
Resizes the image for wide screen size with 16 x 9 aspect ratio.
Keystone
When the image is distorted vertically, select Keystone in the dialog
box. Correct the Keystone distortion by pressing KEYSTONE
button or POINT UP/DOWN button(s).
ADJUSTMENT on page 20.
30

SELECTING COLOR SYSTEM

When the Video signal is from the Y, Pb/Cb, Pr/Cr JACKS

PICTURE SCREEN ADJUSTMENT

and press the SELECT button. Another dialog
Refer to KEYSTONE
Move the pointer to the function and
press the SELECT button.
NOTE : The Regular and the Wide cannot be
operated when "720p," "1035i" or
"1080i" is selected on SYSTEM MENU
(above).
/
This box indicates the
system being selected.
Move the arrow to
the Mode and press
the SELECT button.
This box indicates the
system being selected.
Move the arrow to
the Mode and press
the SELECT button.