Canon LV-7325U Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Canon LV-7325U. Canon LV-7325U 48 halaman. Canon multimedia projector owner's manual lv-7325u
Halaman Cetak
CONNECTING THE PROJECTOR
S-VIDEO INPUT JACK
Connect the S-VIDEO output
from the video equipment to this
terminal.
(Refer to P11.)
AUDIO INPUT JACKS
Connect the audio outputs from
the video equipment to these
terminals.
(Refer to P11.)
When the audio output is
monaural, connect it to the L
(mono) jack.
COMPUTER INPUT TERMINAL
Connect the computer output to
this terminal.
(Refer to P12, 13.)
MONITOR OUTPUT TERMINAL
This terminal outputs the signal
from
the
COMPUTER
terminal. Connect to a monitor
using this terminal.
(Refer to P12, 13.)
COMPUTER INPUT / MONITOR OUTPUT TERMINAL
Terminal : HDB15-PIN
Connect the display output terminal of the computer to COMPUTER INPUT with the VGA Cable (supplied). And connect
the monitor to MONITOR OUTPUT with the monitor cable (not supplied). When connecting the Macintosh computer, the
MAC Adapter (not supplied) is required.
Pin Configuration
CONTROL PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable (the Control
Cable for PS/2 port is supplied).
Pin Configuration
10
TERMINALS OF THE PROJECTOR
R-AUDIO-L
IN
5
4
3
2
1
10
9
8
7
6
15
14
13
12
11
8 7 6
5
4
3
2
1
S-VIDEO
AUDIO
VIDEO
(MONO)
IN
OUT
COMPUTER IN
MONITOR OUT
CONTROL PORT
Red Input
1
9
2
Green Input
10
Blue Input
3
11
4
Sense 2
12
Ground (Horiz.sync.)
5
13
Ground (Red)
6
14
7
Ground (Green)
15
Ground (Blue)
8
PS/2
Serial
ADB
1
-----
R X D
-----
2
CLK
-----
ADB
3
DATA
-----
-----
4
GND
GND
GND
5
-----
RTS
-----
6
-----
T X D
-----
7
GND
GND
-----
8
-----
GND
GND
VIDEO INPUT JACK
Connect the video output from
the video equipment to this
terminal.
(Refer to P11.)
COMPUTER AUDIO INPUT JACK
Connect the audio output from
the computer to this terminal.
(Refer to P12, 13.)
AUDIO OUTPUT JACK (STEREO)
Connect the audio amplifier to
this terminal.
(Refer to P12, 13.)
CONTROL PORT CONNECTOR
When controlling the computer
with the Remote Control of this
projector, connect the mouse
port of your personal computer
to this terminal. It is also used
for write on or read from the
data of the PC CARD SLOT in
MCI mode.
(Refer to P12, 13, 35.)
Non Connect
Ground (Vert.sync.)
Sense 0
Sense 1
Horiz. sync.
Vert. sync.
Reserved