Canon LV-7325U Panduan Pemilik - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Canon LV-7325U. Canon LV-7325U 48 halaman. Canon multimedia projector owner's manual lv-7325u
Halaman Cetak
BEFORE OPERATION
MENU BUTTON
Used to open or close the
MENU operation.
(P17, 19)
NORMAL BUTTON
Used to reset to normal
picture adjustment preset
by factory. (P27, 31, 36)
SELECT BUTTON
Used to execute the item
selected. It is also used to
expand
the
image
DIGITAL ZOOM mode.
(P29, 37)
ZOOM BUTTONS
Used to select zoom adjust.
(P21)
VOLUME BUTTON
Used to adjust volume.
(P22)
BRIGHT SWITCH INDICATOR
This indicator lights when
the BRIGHT SWITCH is set
to BRIGHTER. (P22)
LAMP REPLACE INDICATOR
This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P43)
16
TOP CONTROLS AND INDICATORS
NORMAL
MENU
ZOOM
in
WIDE
TELE
VOLUME
LAMP
WARNING
REPLACE
TEMP.
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P42)
POWER
MODE
AUTO IMAGE
FOCUS
SELECT
PAGE
BRIGHT
LAMP
READY
READY INDICATOR
This indicator is lit in green
when the projector is ready
to be turned on.
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P20)
MODE BUTTON
Used to select input source
among Computer, Video or
MCI. (P23, 30)
AUTO IMAGE BUTTON
Used to operate AUTO
IMAGE function. (P28)
POINT BUTTONS
Used to select an item and
adjust the value on the
MENU. It is also used to
pan the image in DIGITAL
ZOOM mode. (P29, 37)
FOCUS BUTTONS
Used to select focus adjust.
(P21)
PAGE BUTTON
Used to move to the next /
previous page of the data in
the memory card plugged
into PC CARD SLOT.
Page buttons are activated
in MCI mode (P34).
LAMP INDICATOR
This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.