Canon LV-7325U Panduan Pemilik - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Canon LV-7325U. Canon LV-7325U 48 halaman. Canon multimedia projector owner's manual lv-7325u

Halaman Cetak

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the image in desirable size.

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

SCREEN

and press the SELECT button. Another dialog

box PICTURE SCREEN Menu will appear.

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the function that you want to select

and then press SELECT button.

True

To make the image into its original size select True in the dialog

box. When the original image size is larger than the screen size

(1024 x 768), this projector enters Digital Zoom mode automatically.

Keystone

When the image is distorted vertically, select Keystone in the dialog

box. The ON-SCREEN menu and SCREEN ADJUST menu

disappears and the message "Keystone" is displayed. Correct the

Keystone distortion by pressing the KEYSTONE

POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT

on page 21.

Digital Zoom

To adjust the image size or pan the image, select Digital zoom in

the dialog box. The ON-SCREEN menu and SCREEN ADJUST

menu disappears and the message "D. Zoom" is displayed.

This projector also enters Digital Zoom mode by pressing the

D.ZOOM

button on the Remote Control Unit.

Refer to the following for operation.

Expand function

To expand the image size, press the D.ZOOM

Compress function

To compress the image size, press the D.ZOOM

degrees.

Panning function

To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image

is larger than the screen size.

To cancel Digital Zoom mode, press any button except D.ZOOM

LASER button. To adjust the image to the screen size (1024 x 768), press NORMAL button.

This projector cannot display in any resolution higher than 1280 X 1024. If your computer's screen resolution is higher

than 1280 X 1024, reset the resolution lower before connecting the projector.

The image data in other than XGA (1024 x 768) is modified to fit the screen size in the initial mode.

The normal "Panning Operation" may not function properly if the computer system prepared with the "PC Adjust" is

used.

NOTE : The True and the Digital Zoom cannot be operated when "RGB," "HDTV1035i" or "HDTV1080i" is selected on

the SYSTEM MENU (P23 and 26).

button or the

button or the SELECT button. The image is magnified by degrees.

button or the RIGHT CLICK button. The size of image is reduced by

/ , SELECT, RIGHT CLICK, POINT, PAGE

COMPUTER MODE

Move the arrow to the

function and press the

SELECT button.