Canon LV-7350 Panduan Pemilik - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Canon LV-7350. Canon LV-7350 48 halaman. Canon owner's manual multimedia projector lv-7355 lv-7350
Juga untuk Canon LV-7350: Brosur & Spesifikasi (2 halaman)

Halaman Cetak

This projector can automatically tune to the display signals from most personal computers currently distributed. However,

some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi-

Scan system of this projector. If this happens, the projector cannot reproduce a proper image and the image may be

recognized as a flickering picture, a non-synchronized picture, a non-centered picture, or a skewed picture.

This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special

signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This

enables you to recall the setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu cannot be operated when the input signal is digital or "RGB" is selected on PC SYSTEM

MENU (P22).

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

ADJUST Menu icon.

Press POINT DOWN button to move a red frame pointer to the

item that you want to adjust and then press SET button.

Adjustment dialog box will appear. Press POINT LEFT/RIGHT

button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display.

Press POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total dots in one horizontal period. Press POINT

LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press POINT LEFT/RIGHT

button(s) to adjust the position.

Vertical

Adjusts vertical picture position. Press POINT LEFT/RIGHT

button(s) to adjust the position.

Current mode

Press SET button to show the information of computer selected.

Clamp

Adjusts clamp level. When the image has a dark bar(s), try this

adjustment.

MANUAL PC ADJUSTMENT

COMPUTER INPUT

PC ADJUST MENU

Move the red frame icon to the item and

press SET button.

Selected Mode

Press POINT LEFT/RIGHT

button to adjust the value.

Press SET button at this icon to adjust

"Clamp," "Display area (H/V)" or set

"Full screen."

Current mode

Press SET button at Current

mode icon to show the

information of computer

connected.

PC ADJUST Menu icon

Shows status

(Stored / Free) of the

selected Mode.