Canopus ADVC-55 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media Canopus ADVC-55. Canopus ADVC-55 17 halaman. Advanced dv converter

Setting DIP Switches

Use the DIP switches on the right side of the unit to modify the ADVC-55's functionality. Each setting

should be set before this unit is turned on. Setting of Audio Input Level can be switched during

operation.

* : All the switches have been set to OFF at the time of shipment. No.1 and No.2 may differ depending on your point of

purchase.

MODE

NTSC Setup Level (No.1 = OFF)

PAL/SECAM (No.1 = ON)

Audio Input Level

Reserved

Video Format:

Toggles between capturing NTSC and PAL video format. When you convert video data recorded under

SECAM system, set No.1 switch to the ON (PAL) position and set No.2 switch to ON as well.

NTSC Setup Level:

Toggles between 0 IRE and 7.5 IRE when No.1 switch is set to the OFF position. NTSC Setup (output

black level) setting is available only for NTSC.

Audio Input Level:

When you feel converted sound is rather lower (smaller) than expected, set No.3 switch to the ON

position. It may make the sound larger. There is however, a possibility that the sound may be distorted

when the audio signal is over a certain level.

Installation and Operation

* * * * *

OFF

NTSC

0 IRE

PAL

0dB

PAL

7.5 IRE

SECAM

+15dB