Canovate Icera ERVQ-B150-1A1F Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Kipas angin Canovate Icera ERVQ-B150-1A1F. Canovate Icera ERVQ-B150-1A1F 15 halaman. Hepa w wall mount type heat recovery hepa filter fan
Halaman CetakSide installation
1. Paste the 3mm side sealing rings on the flanges, remove the round air inlet and outlet covers from side to the back of
the ventilator, then connect the flanges to the ventilator side by 8pcs M3x12 bolts.
2. Choose the suitable location on wall, mark the 5 fixing holes of the installation panel on the wall, and mark the side OA
inlet and EA outlet location of the side wall according to the ventilator dimension
Attention; Ventilator bottom to the floor around 1.5 meters
Ventilator left and right side to the wall not less than 0.3 meter
3. To drill 5 fixing holes φ6x70mm on the wall according the installation panel, then fix the installation panel on wall by the
5 Knock-on anchor bolts.
4. To drill 2 holes on wall for fresh air inlet and exhaust air outlet, recommended size is diameter 100mm, The 2 holes should
face downward toward the outside to prevent any rain water ingress.
Attention; It is recommended to use the flexible ducts for side installation, flexible ducts prepared by installer.
5. Hang the ventilator on the installation panel, user can adjust the 4 pieces hanging screws on the back of the ventilator
to suit the installation panel.
www.canovate.com
Installation Instructions
11