Canovate Icera ERVQ-B150-1A1F Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Kipas angin Canovate Icera ERVQ-B150-1A1F. Canovate Icera ERVQ-B150-1A1F 15 halaman. Hepa w wall mount type heat recovery hepa filter fan

Buttons function introduction:
1. Long press the button "on/off" to turn on or off the machine;
2. After startup, touch the "Mode" button to switch mode: Auto, Manual, Timer, Sleep,
PUIE L, PUIE M, PUIE H.
Remark; when the machine starts, default is "Auto" mode.
3. Under "Manual" mode, touch "Speed" button to select speed 1-8.
Explanation for all modes:
Under mode "Auto", it will adjust supply air volume according to indoor PM2.5 range, corresponding speed as below:
Remark: To ensure sufficient indoor fresh air supply, the speed will rise automatically after model "Auto" runs for some
time, 5-10 minutes later it will recover to previous speed. During this time, the screen shows different speed from above
chart.
2. Under "Manual" mode, press button "Speed" to set speed.
3. "Timer" mode, refer to remote controller manual.
4. Under "Sleep" mode, the unit runs in speed 1, after 30s the screen luminance will get
half as normal.
5. Mode "PURE L", "PURE M", "PURE H" are to improve indoor air quality rapidly; The purification
performance is enhanced progressively for the 3 modes.
www.canovate.com

Operation Instructions

7