Bolt CYCLONE PP-500DR Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Paket Daya Bolt CYCLONE PP-500DR. Bolt CYCLONE PP-500DR 20 halaman. Dual-outlet power pack with removable battery

Halaman Cetak

Connecting Your Bolt Cyclone DR Power Pack to Your Flash

You can use the Cyclone DR to power a wide range of flash units. Cables sold by some flash and battery pack

manufacturers are interchangeable with Bolt cables, but other flash brands use a different connector type.

Make sure you select the right one.

Important! Load your flash unit with its standard batteries before connecting

it to the Cyclone DR. You may need to set your flash unit to recycle by drawing

power from only the Cyclone DR to avoid draining the installed batteries. Check

your flash unit's manual for details on the relevant setting.

To connect your Cyclone DR to your flash unit:

1. Plug the metal connector of the connection cable firmly into one of the

output sockets of the Cyclone DR.

2. If using a cable with a locking mechanism, rotate the locking collar on the

terminal to secure the cable.

Connecting the Cyclone DR