Cansec MAP2 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol Cansec MAP2. Cansec MAP2 16 halaman. Elevator control

Introduction

The MAP2 elevator controller has been designed to handle access up to 64 floors with the add-on

H1000 panels. In the elevator application, the credential owners simply present their credentials to the

reader mounted inside the elevator cab to gain access to their assigned floors. This prevents access to

unauthorized elevator floors and at the same time allows the building owner to isolate different

organizations that cohabit the same building.

The MAP2 elevator controller is a cost effective solution allowing the building owner to purchase the

correct number of controllers required to control the number of elevator floors. A single MAP2

elevator controller can control up to 16 floors. However, the add-on H1000 panels may be added to

accommodate 32, 48 and 64 floors.

Elevator MAP2 Panel must be provisioned by Cansec each time an additional add-on H1000 is added

Elevator MAP2 Panel

H1000 Panel

Floors 17-32

Floors 33-48

Floors 49-64

Floors 1-16

Optional: H1000 Panels

Elevator MAP2 Panel

MAP2 Elevator Control

Page 3 of 16

Installation Guide

April 2020 • Rev. 1.0