Cansec P-640-HA37 Panduan Petunjuk Instalasi - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pembaca Kartu Cansec P-640-HA37. Cansec P-640-HA37 14 halaman. Canprox proximity/keypad reader
Halaman Cetak
- 1. Table of Contents
- 2. Specifications
- 3. Introduction
- 4. Wall Mounting
- 5. Wiring - Cansec Controllers
- 6. Wiring - 3 Rd Party Controllers
- 7. Programming
- 7. P-640-HA & P-620-HA (26-Bit Wiegand Output)
- 7. P-640-HA37 & P-620-HA37 (Cansec 37-Bit Wiegand Output)
- 8. Proximity/Keypad Reader Usage
- 9. Card + PIN Interface Module - Optional
- 9. Card + PIN Usage
- 10. Reader/Keypad Troubleshooting
- 11. Appendix
CARD + PIN USAGE
When a card is presented, the user must enter a 4 digit PIN, which is algorithmically
derived from the System/Facility Code and ID number of the card they presented,
followed by "#" key. If the correct PIN is entered on the keypad, the System/Facility
Code and ID data from the card is transmitted to the connected access control unit.
If the PIN entered is not correct, or no PIN is entered, nothing is sent to the
connected controller.
Page 12 of 14
CanProx Proximity/Keypad Reader
Installation Instructions
August 2018 • Rev. 1.6